The TRX^® Xtender is 37" inches in length. For greater lengths, simply join two or more Xtenders together. We recommend using one TRX Xtender for anchor points under 25 inches in circumference. And two or more combined Extenders for larger anchor points.

To attach the Xtender, follow these steps:

1. Slide the Suspension Anchor with carabiner end first, through the Xtender's small loop.
2. Wrap the Xtender around the anchor point until the entire length of the Xtender is deployed.
3. The Xtender should wrap around the anchor point at least 1.5 times. (use more Extenders if necessary)
4. Slide the carabiner through the end of the Xtender's big loop then clip the carabiner around the yellow Suspension Anchor strap.
5. Pull hard on the Suspension Anchor. It will pull the loops of the Xtender together, locking the Xtender around the anchor point.
6. To adjust anchor height, release tension on the Suspension Anchor and move the Anchor/Xtender assembly up or down, then repeat step "5" to re-lock the assembly.

Complete set up and use instructions are included in the box. The TRX Xtender is compatible with all TRX^® Anchoring Solutions, including TRX^®Xmount (sold separately).